series am2n-nz 2 watt | dc-dc converter www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r6.d 1 of 3 north america only features: models single output model input voltage (v) output voltage (v) output current max (ma) isolation (vdc) efficiency (%) am2n-0505sh60-nz 4.5-5.5 5 400 6000 78 am2n-0509sh60-nz 4.5-5.5 9 222 6000 79 am2n-0512sh60-nz 4.5-5.5 12 167 6000 80 AM2N-0515SH60-NZ 4.5-5.5 15 133 6000 80 am2n-1205sh60-nz 10.8-13.2 5 400 6000 79 am2n-1209sh60-nz 10.8-13.2 9 222 6000 80 am2n-1212sh60-nz 10.8-13.2 12 167 6000 82 am2n-1215sh60-nz 10.8-13.2 15 133 6000 82 models dual output model input voltage (v) output voltage (v) output current max (ma) isolation (vdc) efficiency (%) am2n-0505dh60-nz 4.5-5.5 5 200 6000 78 am2n-0509dh60-nz 4.5-5.5 9 110 6000 79 am2n-0512dh60-nz 4.5-5.5 12 84 6000 80 am2n-0515dh60-nz 4.5-5.5 15 67 6000 80 am2n-1205dh60-nz 10.8-13.2 5 200 6000 79 am2n-1209dh60-nz 10.8-13.2 9 110 6000 80 am2n-1212dh60-nz 10.8-13.2 12 84 6000 82 am2n-1215dh60-nz 10.8-13.2 15 67 6000 82 input specifications parameters nominal typical maximum units voltage range 5 12 4.5-5.5 10.8-13.2 vdc filter capacitor isolation specifications parameters conditions typical rated units tested i/o voltage 60 sec 6000 vdc resistance >1000 mohm output specifications parameters conditions typical maximum units voltage accuracy see tolerance graph short circuit protection momentary (1 sec) line voltage regulation (single) for 1.0% of vin 1.2 % line voltage regulation (dual) for 1.0% of vin 1.2 % load voltage regulation (single) load 10-100% 15 % load voltage regulation (dual) load 10-100% 15 % temperature coefficient 0.03 %/ o c ripple & noise at 20mhz bandwidth 100 mv p-p ? rohs compliant ? operating temperature -40 o c to + 85 o c ? 24 pin dip package ? input / output isolation 6000vdc ? low profile plastic package ? pin compatible with multiple manufacturers ? high efficiency up to 82%
series am2n-nz 2 watt | dc-dc converter www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r6.d 2 of 3 north america only general specifications parameters conditions typical maximum units switching frequency 100% load 35 khz operating temperature without derating -40 to +85 o c storage temperature -55 to +125 o c max case temperature 95 o c cooling free air convection humidity 90 % case material plastic ul94-vo weight 16 g dimensions (l x w x h) 1.27 x 0.58 x 0.37 inches 32.30 x 14.70 x 9.40 mm mtbf >1 000 000 hrs (mil-hdbk -217f, ground benign, t=+25 o c) note: all specifications are in this datasheet measured at an ambient temperat ure of 25c, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. safety specifications parameters agency approvals culus standards ul60950-1 pin out specifications dimensions footprint typical characteristics pin single dual 1 +v input +v input 2 -v input -v input 8,17 n.c. -v output 10,15 -v output common 12,13 +v output +v output all other pins no connection 32.30 (1.27) 14.70 (0.58) 9.40 (0.37) 27.94 (1.10) 4.00 (0.16) side view top view 0.65 (0.03) 2.54 (0.10) 2.54 (0.10) 2.54 (0.01) 1.00 0 + 0.15/-0 tolerance envelope graph output current (%) output voltage (%) t y p i c a l l o a d l i n e +10% +5% +2.5% -2.5% -7.5% 10% 50% 100% nominal voltage
series am2n-nz 2 watt | dc-dc converter www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r6.d 3 of 3 north america only filtering single output filtering dual output external capacitor ? single output external capacitor ? dual output note: 1. datasheets are updated as needed and as such, specifications ar e subject to change without notic e. once printed or downloaded , datasheets are no longer controlled by aimtec; refer to www.aimtec.com for the most current product specifications. 2. product labels shown, including safety agency cert ifications on labels, may vary based on the date manufactured. 3. mechanical drawings and specifications are for reference only. 4. all specifications are measured at an am bient temperature of 25c, humidity<75%, nominal input voltage and at rated output load unless otherwise specifie d. 5. aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. cas numbers and other limited information are considered proprietary an d may not be available for release. 6. this product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control sys tems or other such applications which necessitate specific safety and regulatory standards ot her the ones listed in this datasheet. 7. warranty is in accordance with aimtec?s st andard terms of sale available at www.aimtec.com. vin (vdc) external capacitor (uf) vout (vdc) external capacitor (uf) 5 4.7 5 4.7 12 2.2 9 2.2 24 1 12 1 - - 15 0.47 vin (vdc) external capacitor (uf) vout (vdc) external capacitor (uf) 5 4.7 5 10 12 2.2 9 4.7 24 1 12 2.2 - - 15 1
|
